Vintage Grinder Sticker Reproduction
- Thread starter mattblast
- Start date
Reproduction labels for a Di-Acro #4 24” Metal Shear. I purchased this last month in rough shape - it was stored outside and totally seized, and was missing the table. Within a week I had it fully disassembled, repainted, and functioning smoothly. It looks so much better with a nice paint job and a set of fresh labels.
Di-Acro wanted more for a replacement table than I paid for the entire machine. I found someone local selling a 1/4” thick sheet of steel, and cut it to size. Some holes had to be drilled, tapped and countersunk. What made this easy was that I already have the exact same unit to use as a template. The funny thing is I bought this for the stand to put on my shear. I’ve had been using a repurposed Delta scroll stand, which I’ve since swapped to this unit.
Before:
After:
Di-Acro wanted more for a replacement table than I paid for the entire machine. I found someone local selling a 1/4” thick sheet of steel, and cut it to size. Some holes had to be drilled, tapped and countersunk. What made this easy was that I already have the exact same unit to use as a template. The funny thing is I bought this for the stand to put on my shear. I’ve had been using a repurposed Delta scroll stand, which I’ve since swapped to this unit.
Before:
After:
senlow
Well-known member
Nice restoration on that sweet little shear. Kudos to whoever made those beautiful nameplates for you! 
Here is the reproduction tag complete. It is laminated with a scuff resistant polycarbonate, then applied to a 0.020” sheet of aluminum with 1/8” holes punched for drive screws.@mattblast
Would you be interested in doing this Dayton one for me? I can scan to pdf or whatever you need
Mikesvilla
New member
Do you have any left?Hey Matt,
I re-did a Dayton grinder and my labels are in poor condition. Can you please take a look at the attached and let me know what you might be able to do? I'd really like the main motor label and on/off switch label re-done in aluminum. I did manage to save them in the resto but they detract. Also, the top safety sticker would be a bonus or really any age appropriate "PUT ON YOUR GLASSES" style label would be great...I need the reminder
Original photo:
After resto:
Additionally, I had some Baldor vertical vinyl stickers made for my sander. The creator was kind enough to send me some additional color options so, I can pass these along if anyone can use! White or some shades of blue....
![IMG_0487[1].JPG](https://www.garagejournal.com/forum/data/attachments/1529/1529501-95e2f3f6b05657cfed430f12fb509fdc.jpg "IMG_0487[1].JPG")
![IMG_0479[1].JPG](https://www.garagejournal.com/forum/data/attachments/1529/1529493-f7059ec1bb7e6296a2db393b654afbb6.jpg "IMG_0479[1].JPG")
![IMG_0502[1].JPG](https://www.garagejournal.com/forum/data/attachments/1529/1529499-69326cf40674604897c41124f382eb02.jpg "IMG_0502[1].JPG")
Cruzan80
Well-known member
You should have added "Theoretical" above the HP, but in dark gray, so it was harder to read...
You do very nice work!
It sounds like your method is far easier than the one I used with a 1937 Delta 24" scroll saw.
I had two decals (not nameplates or stickers) to replace, and it took a lot of work to reproduce them. I created the various text areas (the fonts had long since been obsolete), and then brought everything together in one file to print.
I re-did the entire saw, decals and all. All things considered, I think it turned out well.
I am currently trying to decide what to do with a 1941 Delta drill press. The main decal is mostly intact, but no where near perfect. The paint has been darkened by decades of exposure to oils and the environment.
It sounds like your method is far easier than the one I used with a 1937 Delta 24" scroll saw.
I had two decals (not nameplates or stickers) to replace, and it took a lot of work to reproduce them. I created the various text areas (the fonts had long since been obsolete), and then brought everything together in one file to print.
I re-did the entire saw, decals and all. All things considered, I think it turned out well.
I am currently trying to decide what to do with a 1941 Delta drill press. The main decal is mostly intact, but no where near perfect. The paint has been darkened by decades of exposure to oils and the environment.
Finally getting to a single phase twin to this grinder & it needs a new data plate due to fading.Is this image clear enough to create a duplicate? A single voltage 3 phase 200V grinder is not as common as the 230/460V 3 phase, or 115/230V single phase models . For those who don't know, 200V is for use on a 208V system.
When I bought my grinder the tag was missing, it came from a school in Truckee, CA.
I made a set of labels for Garage Journal member BreeStephany for a Skilsaw 107 restoration.
My printer prints one color, then rewinds the material before printing the next. This can cause mis-registration between colors up to 0.030”. Most of the time this isn’t noticeable, but when there’s an overlap between colors, I add a bleed to the top color. You can see an area where both the black and red print on top of each other.
Before:
After:
My printer prints one color, then rewinds the material before printing the next. This can cause mis-registration between colors up to 0.030”. Most of the time this isn’t noticeable, but when there’s an overlap between colors, I add a bleed to the top color. You can see an area where both the black and red print on top of each other.
Before:
After:
Lucas fuel injection plate from a Maserati. This is engraved on 0.060” aluminum using a 0.030” engraving bit. It was then color filled with a bake to cure paint for durability and heat resistance.
I had an exact match single stroke font for the small text, then hand drew the Lucas logo. The smaller holes were punched and the larger one was drilled then filed to size.
It still needs to be stamped and polished, then is ready to install
Before:
After:
I had an exact match single stroke font for the small text, then hand drew the Lucas logo. The smaller holes were punched and the larger one was drilled then filed to size.
It still needs to be stamped and polished, then is ready to install
Before:
After:
Last edited: