Search results

Looking for original knife setting gauge for Performax model 240 bench top planer sold at menards. I know I can buy something after market but would like a original one thanks. Bill

Can anyone identify this old wood vise? No name on it only 561A and 561B Thanks for any info.

Have a few parts for wilton vise for sale. Missing movable jaw, and nut but have the rest of parts. Reasonable offers for someone to complete their vise.

Found all but movable jaw. Looks like a wilton but no markings. Any idea of brand? Only thing wrong is nut is wore out. Hopefully will find movable jaw tomorrow. If I can't find maybe someone will need parts. 6" jaws. Thanks for any identification!

Would like to restore this old drill. Anyone done one of these? Is chuck threaded on? No screw visible in bottom of chuck. Also anyone have pics of disassembly instructions? Thanks for any help Bill

Picked up a really nice jack. Small handle will only go to raise and lower position and will not stop in neutral. Have adjusted nut on bottom of chain but no help. It does raise and lower as it is supposed to. Any ideas? Something broke where raise and lower handle is attached inside Thanks for...

I know this is not a tool but thought some here could shed some light on this bell Want to get it working. Is it AC or. DC current. Thanks for any help. Bill

Saved some parts from the grinder. That was scrapped Maybe someone is looking for original parts Left and right tool rests...30$ each Left and right end covers...45$ each 2 spark arrestors....10$ each Buyer pays shipping If you don't like the price I'm open to offers I don't need...

Grabbed this nice Baldor grinder stand today. Cast # A407, grinder was large 12" 3 phase which was being scrap for copper at 5$ a pound now. Going to clean up and use for next find.

Can someone tell me how to remove this chuck. Would like to use it in a small drill press. Is it tapered or threaded. I do not have a set of wedges if tapered. I see it says 11N2 JT. Thanks for any help. Bill

Looking for a base for 724A Athol ratchet vise Let me know if you have one in your vise parts bin Thanks . Bill

-5° today but went to scrap yard anyway. Found this Anthol vise. Had repairs and pretty rough but want to try and save. Patent date on swivel base is Sept. 3 1912. Not sure of model as it has been brazed on label . Something 24A. ,4" jaws. Not sure if handle is original as that has been brased...

Anyone worked on one of these cheap foreign small chain hoists? Chain goes up but will not go down. There is a pawl inside that clicks on ever notch for holding but doesn't have a lever to move to disengage pawl. Could use some help on this if some has had this issue. Maybe someone has the...

Looking for someone to identify this older drill press. I'm sure it's factory made. Hated to see it crushed at scrap yard so will clean up and mount a motor on it and see how it goes. Thanks Bill

Hope someone has one laying around that's reasonably priced. About 9 1/2- 10" long 7/8" diameter. Thanks

Doing a resto on vintage black and decker 1 h.p bench grinder. It does work but after disassembling it wiring does not look correct. Previous owner had been replaced some wiring and just does not look correct. Capacitor has only 2 spades but has 3 wires, 2 on a spade and 1 on the other spade...

Now that winter is here starting on a old 10" Black and Decker grinder. Have a few questions. First. Is it worth pulling motor completely apart for sand blasting the housing ? Bearings seem good and motor does work. If so how do the inter wheel flanges come off. 2nd . Does need to be rewired as...

Looking for a small to medium Canon forge crane Complete but ok if it needs little TLC. Have hit and miss engines to trade or cash. Let me know what you have. Thanks Bill

Just traded a small vise for this large Reed. Was frozen up so spent a couple days cleaning and getting everything moving. Would like to replace jaws on this vise. Are they pinned on to the top of jaws? In picture there seems to be pins. Any help with this would be appreciated . Thanks Bill

Very nice shape for the age. Has socket tray and Craftsman badge. Has been painted years ago 50$ obo plus shipping. Thanks for looking.