Hi There.
Restoring a LeRoi Dresser model 400 (identical to the Westinghouse/Wabco 2AVC) and could use consumable service items (rings, seals, gaskets, etc., etc.). Especially need some undersized big end bearings as I need to have the crankshaft ground.
Am also potentially interested in other bits if you have them sitting on a shelf somewhere. I'm restoring pretty much everything that has wear, but I'm happy to save time if there is a good condition part sitting somewhere.
Thanks!
Link to thread about the compressor:
www.garagejournal.com
Restoring a LeRoi Dresser model 400 (identical to the Westinghouse/Wabco 2AVC) and could use consumable service items (rings, seals, gaskets, etc., etc.). Especially need some undersized big end bearings as I need to have the crankshaft ground.
Am also potentially interested in other bits if you have them sitting on a shelf somewhere. I'm restoring pretty much everything that has wear, but I'm happy to save time if there is a good condition part sitting somewhere.
Thanks!
Link to thread about the compressor:
LeRoi/Dresser (Westinghouse) Model 400 Air Compressor Rebuild Questions (Balancing the Pistons?)
Hi There, Long time lurker and think this might be my first thread posted. Anyway, I recently saved from the scrap heap what turns out to be a LeRoi/Dresser model 400 air compressor pump. It was in a local Jr. college tandem compressor set-up for their welding and Machine shops and the tank...
www.garagejournal.com