Search results

Lmao, you’re not far off. I got it second hand a couple decades ago and it had already had a rough life. And life with me along with several employees having access to it didn’t help at all 🙄 My personal truck normally gets driven about once a month just to keep things lively. But I...

That’s really awesome. I was a **** student and graduated by the skin of my teeth. But once in trade school I out shinned them all and a few years later while getting a degree in electronics pulled off top of the class as well. Point is, maybe he’s found his interest and he obviously has a...

Well Will I added to the box collection. I’m not sure which one or even either will solve what I want done but if anything they’ll get used that’s fur sur

Outfnstanding scott, you really outdid yourself this time buddy. :bowdown: :bowdown: :bowdown:

My baby powered screwdrivers showed up plus an option on a truck box change out. We’ll see which one can eliminate my original roller bottom. Since going with the modcarts I haven’t used it all.

I few weeks back I got a set of 6” long torx security bits that are claimed to be made of S2 steel with hardened and magnetized tips for $20. Upfront I didn’t have much faith in the quality but they have turned out to be really decent stuff. So last weekend I went down the rabbit hole of...

I’m thinking @Yankeefarmer nailed it. How deep do you have the guide set for.

This one is named….nowimpissedoff Monday while trying to drill 3.25” holes through four panel layers in a fd up position at face level and having the hole saw snag and slam my hand between it and the cabinet frame three damn times within five minutes I ordered this. Stupid hole saws 🤬 🖕😉...

I’d suggest going with a 28 considering the rig you have (same as mine) This was my mover n shaker out to AZ on our move. I built some raised platforms to help deal with not stacking whatever’s and it worked out perfect. I never made a trip that wasn’t maxed out in capacity.

Bought time bud. I’d require an unconditional release, then wait until day 80 to send it certified. 😘

I totally agree J

My last place I did all the man and rolling gates out of 2x2x.120 tubing. We wanted the tops to roll up to a peak so I had a fab shop roll them for me. Problem was the tubing was too thin and would cave the side walls like your issue. My buddy who ran this shop stepped it up to 3/16” wall and...

It’s hard to miss but every time I drive by it I dream of filling it with concrete and siding that baby. Not only could it cover a full blown shop and allll my stuff, I’d still have more than enough room for a indoor go-kart track 🤣

B, have you ever seen the red iron one off of the 89 between Wickenburg and Congress on the west side. That baby is massive. I be it’s a solid 50ksqft.

Alright @willf650 those crates came in today. Now I just need some 1/2” emt, we never use anything under 3/4 sooo

Heresy! Everyone should own a 20mm 😆

Not really a tool but I’m thinking darn handy. We do a ton of control work so separating multiple colors of #12, #14 and #18 like this might be a winner.

I can’t believe you veterans missed the obvious.. Because theres a peg..duh!!

Well Google screwed you n me then. The add that immediately popped up was a 5/8. So I clicked on it n just grabbed the link.. See if I trust those guys again. 🙄

Sk used to n still might. I think Tekton does. Yup, they do...